Frequently Asked Questions:

How many legs do you get? How do I attach the legs on to the frame?

In the picture there are 8 legs but only 5 legs are required, so we only ship out 5 legs. If you want us to ship out 3 more extra legs (to make it 8 legs) please let us know ahead of time. You will need a 1/4″ diameter drill tip to drill holes on the bed platform where you want the legs to be placed. Once the holes are drilled, the legs will already have the screws to attach and twist the legs into place on the platform.

How strong is the platform frame?

We take pride in building our platforms. The platform frame is very strong and sturdy. The top and bottom of the beds are made out of ½” thick CDX plywood that is 5 ply which is glued and screwed to the center section of the bed.

5 ply plywood is 5 grains of wood, each going a different direction for strength and durability. The center section of the bed is made out of 2 x 6 x 1-1/2” limber like builders used in building homes for walls. This wood is also glued and screwed together for strength just like the rest of the bed.

Then 1” thick foam is applied to the side of the plywood platform before the fabric is put on. Lastly, the legs are attached with wood dowel screws that screw through the ½” thick plywood and into the center section of the bed

How is this Round Bed Mattress shipped?
A high quality carrier will ship and deliver right to your door! You also have the option for the carrier to deliver to the bedroom. If you require an inside delivery, please be sure to specify that at the time of ordering.

Foam Mattress- This mattress will be shipped in one-piece and will be vacuum packed. Please open and allow the foam to expand to it’s original shape for 1 hour.
Round Wood Platform- The platform will be shipped in 2 pieces, equally cut in half. The purpose of this is so that you can easily get the Platform frame through the door. Please take a look at the pictures to see the platform set.

Is the Round Bed Delivered Inside The House?
We apologize for any inconveniences, but this bed would not delivered inside the house. The carrier will be delivering at your front door (like a UPS package). It will be your responsibility to get some help to deliver it to your bedroom.

How do I add a round bed in my room if the room is too small?

It is best to make a paper template to see what round bed size fits in your room. You can also add the round bed in the corner of the room to add more space.

Also to add more space we can custom make the round bed so that it is flat on one side. Please contact us for more details.

Can I return the Round Bed Set?
For Custom Orders – Since the Round Beds are custom made to your specifications, they are not returnable for any reason. Orders cannot be canceled or changed once production has begun.

We also Specialize in Sheets, Comforters, and Coverlets for round mattresses.

* Custom Made Sheets:
This wrinkle free sheet set is 100% Cotton Sateen and is 300 thread count. Its the highest level of easy care you can buy. Once the sheets come out of the dryer the sheets will still look smooth and will feel super soft. This is called Moist Cross Linking. By treating the fabric at the fiber level, we can produce sheets that resist wrinkles wash after wash.

Complete sheet set:
1 Flat sheet
1 Deep fitted sheet up to 8″ Thick
2 King pillow cases
Care Instructions: Machine wash warm with like colors and before first use. Do not bleach. Tumble dry low. Remove promptly.

We have many colors for you to choose from such as: white, ivory, black, beige, sky blue, mid-blue and magenta. Or you may send us your fitted sheets

96″ Round is $385.00

84″ Round is $295.00

72″ Round is $250.00

60″ Round is $225.00

* Comforters (No zipper): Labor – $595.00
You will need to provide us with 12 yards of fabric.

* Coverlet (comes with zipper to insert your stuffing): Labor – $695.00
You will need to provide us with 12 yards of fabric.

* Please note: there may be air holes or “birthmarks” that cannot be controlled or replaced. If you need to see a picture of what it looks like please let us know.

* We vacuum pack the foam to reduce on shipping cost. Please opened package right away and you will need to give the foam 1-2 days to come back to its original shape. It will look a little misshaped and not measure to its correct size until after you let it expand back out.

* To remove the tiles off of the wall (without adhesive glue) try to use a steamer and then you may need liquid paint thinner.

Our acoustic tiles are cut exactly to size as shown on our web site but when we used a machine to compress the foam sometimes the acoustic foam will not come back to size.

The acoustic foam will have a +-1/4” tolerance.

If the tiles that are too big can be push and compress down to place when gluing to make it the correct size. The tiles that are too small can be stretch a little to make it the correct size.

If you have any questions or concerns about this statement please feel free to contact us.

Please note: When comparing different types of Acoustic foam with other companies it is most important to look at the density and ILD of the foam. All of our acoustic foam has a 1.7lbs density and ILD of 70.

All Noise Studio Control foam is a California 117 flame retardant specification, class B type. Please look at specs sheet for more details and our disclaimer.

Also, please check your building codes before installing our acoustic foam. Different building codes apply to different locations. Our foam will not pass the E84 Test