* Please note: there may be air holes or “birthmarks” that cannot be controlled or replaced. If you need to see a picture of what it looks like please let us know.

* We vacuum pack the foam to reduce on shipping cost. Please opened package right away and you will need to give the foam 1-2 days to come back to its original shape. It will look a little misshaped and not measure to its correct size until after you let it expand back out.

* To remove the tiles off of the wall (without adhesive glue) try to use a steamer and then you may need liquid paint thinner.

Our acoustic tiles are cut exactly to size as shown on our web site but when we used a machine to compress the foam sometimes the acoustic foam will not come back to size.

The acoustic foam will have a +-1/4” tolerance.

If the tiles that are too big can be push and compress down to place when gluing to make it the correct size. The tiles that are too small can be stretch a little to make it the correct size.

If you have any questions or concerns about this statement please feel free to contact us.

Please note: When comparing different types of Acoustic foam with other companies it is most important to look at the density and ILD of the foam. All of our acoustic foam has a 1.7lbs density and ILD of 70.

All Noise Studio Control foam is a California 117 flame retardant specification, class B type. Please look at specs sheet for more details and our disclaimer.

Also, please check your building codes before installing our acoustic foam. Different building codes apply to different locations. Our foam will not pass the E84 Test